Showing posts with label dresden plate. Show all posts
Showing posts with label dresden plate. Show all posts

Wednesday, June 26, 2019

Patriotic Table Topper {June IBA Finish}

Hip hip hooray -- my June Island Batik ambassador project is finished just in time for the Fourth of July next week!


I used a red IB fabric to make bias binding for this table topper. Curved bindings require bias bindings without a doubt! I added this binding completely by machine for stability; I'm anticipating this topper being washed on a regular basis.



Now I have not only used a new technique (hooray!) I've also made something fun, functional, and festive for my patio table!


As an Island Batik Ambassador, I am provided with samples of various lines of Island Batik fabrics to use and share with you!

Quilt stats:
Name: Patriotic Dresden
Pattern: self-designed
Fabrics: Various Island Batik Scraps
Batting: scraps
Quilting: Loops and stars in white thread
Techniques used: Strip piecing, Dresden plate, FMQ, bias binding
Size: Approximately 28" in diameter
Started and Finished: June 2019

Sharing at Let's Bee Social and Brag About Your Beauties!

Friday, June 21, 2019

Patriotic Dresden {June IBA project}

I've finally managed to dedicate some time to working on my Island Batik Ambassador project for this month!


My original plan has been slightly modified -- more in name and less in execution. Rather than making a mini quilt to hang for the patriotic holidays, I'm now planning to make a round table topper for my patio table. The rest of my plan is the same -- a Dresden Plate with strip pieced wedges on a white background. As an Island Batik Ambassador, I am provided with samples of various lines of Island Batik fabrics, Aurifil thread, and Hobbs batting to use and share with you!

After measuring my patio table, I decided that my wedges needed to be 12.5" long, so my strip pieced sections will be made of six 2.5" strips. My strip sets ended up looking quite wonky since I was working from scraps.


I cut 12 wedges from my scrappy strip sets.


Next came creating the points of my wedges.


I then sewed the wedges into sets of three and then my plate quarters into a single plate.


At this point, my Dresden plate is about 24" across and I cut a 30 inch square of white Island Batik solid for my background. I used blue thread to applique the plate to the background fabric. Lots of pins were required!


I used an older piece of Island Batik yardage in teal for the backing and used white thread to do the quilting. I quilted stars and loops to go along with my patriotic color scheme.


After quilting, I measured approximately 2 inches from the tip of each point to create a circle for trimming my square-ish piece into a circle. Next up is preparing the bias binding and finishing the table topper!

Sharing at Oh Scrap!

Friday, June 14, 2019

Try a Technique {June IBA Project + Giveaway}

This month's theme for our Island Batik Ambassador assignment is trying a new technique!


This is a theme that we've had before for our Ambassador challenges -- last year, I played around with using bias tape to make a table runner.


This year, I'm going to try a technique that's been on my to do list for a VERY long time -- making Dresden plates! My plan is to make a Dresden plate mini quilt. As an Island Batik Ambassador, I am provided with samples of various lines of Island Batik fabrics, Aurifil thread, and Hobbs batting to use and share with you!

I do not have a Dresden plate-specific ruler, but I do have a variety of other wedge rulers that can also be used to make the necessary wedges for Dresden plates.

There are a lot of different Dresden plate tutorials out there -- some using specific rulers, some not. The basic thing about Dresden plates is that the larger the angle of the wedge, the fewer wedges are required to make a full plate. The ruler I'm going to use has a 30 degree angle, so each block will have 12 wedges.

For my fabrics, I'm going to use some red, white, and blue Island Batik Scraps.


Since I haven't done an Island Batik giveaway in a while, let's do one today!

This time around, I'm sharing a bunch of the fabrics left over from my Plus Sign Sampler that I made last month. There are a lot of yellow, orange, and red scraps.


Comments for entries, you know the drill. If for some reason, you have issues with leaving a comment, send me an email (littlebunnyquilts@gmail.com) and I'll comment on your behalf. (PS. If you have issues commenting on my blog and other blogs, it is usually a result of your cookie and security settings.)

Leave me a comment telling me about what new techniques you've tried lately or what new techniques you want to try soon!

Giveaway is now closed and the winner is Nancy!